Habe hier eine Diskette mit den Micro11 Uster Tests.
Behauptet, sie würde 10 Minuten für den Durchlauf brauchen, hier schon eine Stunde unterwegs.
Hat jemand den Test schonmal durchlaufen lassen?
Gruß
Code
Loading DIAGNOSTIC OPERATING SYSTEM - V8.0 PART 1
This will take a few seconds. Please wait ........
USER DIAGNOSTICS MENU - V8.0 - PART 1
T - Test your System.
I - Identify System Devices.
F - Field Service Diagnostics Menu.
Type the letter then press the RETURN key. OR if you are
finished running diagnostics, remove the test media. ............ I
IDENTIFICATION OF SYSTEM DEVICES.
Your system has:
DEVICE QUANTITY
Floating Point Processor (FPP)... 1
To return to the User Diagnostic Menu, type U then
press the RETURN key. ......................................
USER DIAGNOSTICS MENU - V8.0 - PART 1
T - Test your System.
I - Identify System Devices.
F - Field Service Diagnostics Menu.
Type the letter then press the RETURN key. OR if you are
finished running diagnostics, remove the test media. ............ T
Install a blank cartridge in any RC25 drive that is empty.
Press the RETURN key to begin the test, OR to return to the
User Diagnostics Menu, type U then press the RETURN key. ...
SYSTEM TESTS IN PROGRESS.
The 2 tests will take about 10 minutes. Results will be
reported at the end of each test. Angle brackets and
stars will be printed to indicate testing is in progress.
To halt either test at any time and return to the User
Diagnostics Menu, type ^C by holding down the CTRL key
and pressing the C key.
IDENTIFICATION OF SYSTEM DEVICES.
The two System Tests will test the Processor, Memory
and Line Clock. Additional Devices that have been
detected and will be tested by the first test are:
DEVICE QUANTITY
Floating Point Processor (FPP)... 1
********************************************************************************
Alles anzeigen