Giacomo Vernoni hat infos hier gegeben
http://sleepingelephant.com/ipw-web/bulletin/bb/viewtopic.php?f=4&t=7951
Giacomo Vernoni hat infos hier gegeben
http://sleepingelephant.com/ipw-web/bulletin/bb/viewtopic.php?f=4&t=7951
2 polige Stecker gabs auch in Europa.
Ja. siehe hier http://vic20.de/VCVIC20.pdf
USA ohne steg, EU mit steg.
Diese 'PAL version' hat ohne steg
http://m.ebay.de/itm/182083150787
Gibt es so was? Kein info von jogi auf vic20.de
Kernal, 6561 und psu sagen PAL aber gehäuse, 2 polige stecker sagen NTSC.
Ich denke Giacomo Vernoni hat hier ueber versand nach italien gefragt.
Neil. Leider nicht. Nur ueber PM erfahren. Ich wollte selber kaufen, und war schicken das es nicht mehr da war. Denn habe ich gefragt was passiert ist.
Erst meldung war fehler in beschreibung. Neuer auktion folgt
Zweit meldung war ueber misverstaendnisse mit hoechstbieter
Dritten meldung war geraete ist verkauft an der hoechstbieter nach anwaltskosten bedrohung
Letzte vc1020 war fur 220 euro in ebay. 150 fuer diese vc20 auch.
Der verkäufer hat der auktion fruhzeitig beendet wegen fehler. Er wollte korrigieren und neu reinstellen. Anstadt von alle gebot stornieren hat er and der momentar hoechstbietter verkauft. Der gewinner von auktion meinte rechtsbindend kaufvertrag ist vorhanden.
VC20 (microgamma), VC1020 und 40/80 zeichnenkarte < 30 euro inkl versand
Ich habe mein auch vorloren.
Als ersatz habe ich m2.5 x 5 mm schwarz imbuss maschineschrauben (von ein Kyosho rc auto bausatz) verwendet.
Ich habe 6 x VC20 und 10 x VIC20 bestellt + 20x power. Wenn die da sind, und nach mein urlaub du kannst dein anschrift per PM senden und werde ich 2 stück senden.
Zitat von "oldcomputr"Alles anzeigenHi all,
I have launched a Kickstarter campaign for a book about the VIC 20: please take a look!
Comments are very welcome.
This is an excerpt of the description:
These are a few mock-ups I prepared for Kickstarter:
Hope you like it, back it, and share it Thanks!
@fladdy
Ich weiss es nicht wie weit du gekommen bist mit deine schild. Heute habe ich mein zweites entfernt, und dieses mal war es kein CR sondern ein 9 volt model. Anstadt von steif und dickes materialien war es leider sehr dunn (wie ganz normale vinyl. Denn habe ich mir entscheiden einfach neuer schilder drucken lassen. Falls interesse besteht, hier ist mein SVG datei
Gestern habe ich din 7981(linsenkopf kreuz verzinkt) hier gekauft
http://m.ebay.de/itm/Blechschrauben-Linsenkopf-Senkkopf-Linsensenkkopf-verzinkt-DIN-7981-7982-7983-/390671453259
2.9 mm x 6.5 mm c64 mainboard schrauben
2.9 mm x 9.5 mm c64 gehäuse schrauben
3.5 mm x 9.5 mm c64 gehäuse schrauben (alternativ)
U18 390059-01 CHARACTER ROM
No characters. Startup has border, but "garbage" where characters
belong. Entire area inside border just lines or blocks.
Aber nicht wirklch sicher als China boiler mit gefaelschte CE logo ? Ich denke neulich an diese"hover boards" aus und duztend braende. Aber nun send Wir et was OT.
Boulderdash von lemon64.com wird dir ein 5 poelige bucshe verkaufen
Ich weiss es nicht wo die stecker herkommen, aber so würde ich es machen. Weibliche stromeingang entlöten und 2 hohlstecker anbringen.
Folgender 9vAC habe ich schon:
oder ander alternativ:
Und 5v DV (habe ich alle beide)
Und naturlich habe ich auch ein Ray Carlson C64/C128 PSU, aber die sind hier als 'gefährlich' gesehen?
So ein fehler habe ich gehabt. Denn habe ich aufgegeben und an ein bekannter gegeben, Der had auch standing diese fehlermelung gehabt. Am ende liegt es an mein verkablung.
Gefunden auf lemon64.com
Ich suche fuer ein VC20 ein taste halterung. Diese ist et was dicker und kurzer als ein von c64. Hier reaches abgebildet.
Nur mit der fernbedienung kannst du dein bild einstellung anpassen (horizontal, vertical, refresh rate usw)
Und ausverkauft.
Ich habe mehr bestellt, aber herstellung und versand dauert ewig. Falls interesse besteht, ihr könnt hier reservieren.
Kannst deine Aussage direkt verlinken?
Leider für mich auch nicht mehr sichtbar. Ich habe am montage mein zweites bestellt, und heute DHL sendungsnummer bekommen. Diese non-ZIF model war nur für 'ausgewälte kunden' sichtbar, und mit mein zweites bestellung habe ich wärscheinlich mein limit erschöpft??
ZitatAlles anzeigenC64 Reloaded (no ZIF)
Available for immediate delivery
Notify me about stock status and product-related news.
179,94 €
This is a very limited edition of the C64 Reloaded: It does not have ZIF sockets but standard turned "precision" sockets. Further, it is shipped with NOS-CIA chips and with a real 8701 timing generator chip. All other specifications are identical with the "standard" C64 Reloaded.
The C64 Reloaded is a new C64 mainboard - made in 2015. So what's new about the C64 reloaded? We're proud to say: Only very few things are new. We took the original Commodore schematics for mainboard 250466 and only did tiny surgical improvements to create a mainboard that is fully compatible with the original C64, but also has enhancements in a few spots that add to it's usability and reduce power consumption. Other than that, it's a C64, and we assume that you know exactly what that is - we therefore don't describe the C64 here, but the differencies and enhancements that we've made.
The power switch looks just like the original, but instead of two positions, it has three of them. In "down" position, the computer is switched off. In "middle" position, it's switched on. The "up" position will reset the machine, and automatically click back into the middle "on" position. This lets you use a reset button without the need to drill a hole into your case for an additional button.
Power conversion is probably the biggest change from the original C64 to our C64 Reloaded: Our design makes use of modern a DC-DC converter, which brings efficiency of the whole computer into the 21st century: While the original C64 requires a transformer-based power supply, which is very low-efficiency by it's design principle, our C64 Reloaded takes a 12V DC power source, so you can make use of a modern power supply that is compliant with the EuP-directive. This new, smart power design has a lot more reserves than the original C64: With up to 4 amps on the main 5V power rail, the C64 Reloaded can provide more than twice as much power than it's role model.
The original C64 can use a standard TV as a monitor, because it had a built-in TV modulator. The C64 Reloaded does not use this technology any more, because in the year 2015/2016, TV sets with an interface for that kind of signal are not common any more. The C64 Reloaded has two connectors in the place of the TV modulator that let you make use of more common audio and video interfaces: An S-Video connector and a 3.5mm audio jack. These two connectors are mounted on a separate circuit board, which is mounted at an angle on the C64 Reloaded. This puts the two connectors in positions where the holes of the original C64 case can be used, and drilling or milling won't be required.
All ROMs of the C64 are united in a single EPROM chip, which not only reduces power consumption, but also gives some extra space for a second Kernal ROM and a second character set. Customers who own an EPROM programmer can create their own set of ROMs and switch between the two choices: The C64 Reloaded board gives the RESTORE key an additional meaning. The standard use of this key is to tap it once. On the C64 Reloaded, you switch between the two Kernal ROMs by holding down the RESTORE key for three seconds or more. Once again, this enhancement does not require any modifications on the original C64 case, so you don't have to damage such an original case. The EPROM of all C64 Reloaded boards are pre-programmed with two identical Kernal and character ROMs.
Finally, there is a true innovation under the hood of this new motherboard: The VSP-fix. VSP stands for "variable screen position" and it was first discovered in 1987. However, this programming trick does not work on all C64 computers. Some computers crash when this effect is used, and others work fine with it. For the C64 Reloaded, it's not a game of chances: All C64 Reloaded boards are VSP-safe. For an in-depth description of this feature, please read the technical article in our Wiki.
There are a few more technical details of the C64 Reloaded that may be of interest if you are a technical person. An in-depth description of jumpers, connectors and chip options can be found in our Wiki article about the C64 Reloaded, which also serves as online documentation.
The box includes:
•C64 Reloaded motherboard without ZIF sockets
•CSG8701 timing generator chip
•CIA chips 6526 (new-old-stock)
To make it a full computer, you need to add:
•Processor 6510 or 8500
•Video chip 6569, 8565, 6567 or 8562
•PLA chip 906114-01, SuperPLA or RealPLA
•SID chip 6581 or 8580
•case
•keyboard
•12V DC power supply
•metal side-bracket (if you want to use the breadbox-type case)
https://icomp.de/shop-icomp/as…es/a/c64r-l1-8a62e42a.jpg
https://icomp.de/shop-icomp/as…ages/c/c64-2-a0bf002c.jpg
https://icomp.de/shop-icomp/as…ages/e/c64-3-fe0cd0be.jpg
https://icomp.de/shop-icomp/as…/c64r-noscia-38e7e3d9.jpg
https://icomp.de/shop-icomp/as…/3/c64r-8701-213c54b3.jpg
... und noch ein Kandidat für diese Rubrik:
http://www.ebay.de/itm/Kaypro-…2d3fcb:g:du8AAOSwezVWwsnM
Ein C64 reloaded für schlappe 451,- (5 Gebote angeblich) plus natürlich die Kleinigkeit von 30,- Versand aus Dänemark.
Viel Spaß beim Bieten 3,2,1 seins
Sonderlich lüstig weil beim iCOMP.de als non-ZIF version für 180 euro vorrätig.
Siehe auch hier 1500 au$ http://www.ebay.com.au/itm/141927501189
Das Angebot klingt interessant aber laß mir noch ein paar Tage Zeit. Melde mich ggf. Anfang nächster Woche nochmal.
Die sind da, ich schicke dir ein PM
Ich habe feder in china machen lassen. 64x tasten + 1x für leertaste.
12 euro + 1.45 euro versand. Interesse über PM
Der schild ist kein 'papier'. ca 0,23mm dickes kunststoff. Meine had 55 grad in der geschirrschpüler überlebt. Probier mal mit ein fon/haartrockner zu entfernen.
ZitatSo inside my 'paper label' case, I found a small adhesive 'dot' stuck next to the LED. I guess this is the punch out of the POWER badge. I am not really sure it is paper it is more plastic and is 0.23mm thick. The case is in the dishwasher now, and the label has survived the prewash. The label anyway was not 100% correctly aligned, so I wonder if the glue will survive the 55 degrees C cycle. I will update tomorrow...
Update
Sure, no issues with the 'paper label'
Kannst du ein bild von alte gehäuse reinfügen? Ich kenne 3 verschiedene gehäuse sorten an haltenase erkennbar:
3x 2 hacken
3x hacken (rechts breit)
3x hacken (rechts schmall)