Hab nun ein Gotek Floppy emulator (Modell: SFRKC30.AT4.7) mit FlashFloppy v3.28
Mir ist aufgefallen, das es spürbar langsamer ist, als das echte 5 1/4" Laufwerk.
Nun hab ich in der FAQ folgendes gefunden:
Zitat
Raw Images (IMG/IMA)
Images work but are much slower than a real floppy drive (half speed or worse)
- The host probably expects sectors to be interleaved (non-sequential) within a track, and/or to be skewed (sector 1 at a variable offset) across tracks. Interleave and skew can be adjusted via a custom track layout in IMG.CFG.
In IMG.CFG, how do I work out what interleave and skew values to use?
- Many systems require neither and you can use the default 0 values. If your disk accesses are very slow (see previous question) then try adjusting cskew incrementally until you see a performance increase. Then repeat for interleave. A very few systems require sskew too, but this is rare. If you have access to an HFE image that works at correct speed, you can check for interleave and skew in the Track-Analyser visualiser in the HxC software suite for Mac and Windows.
Das könnte es ja sein, oder?
Hat schon jemand die optimalen cskew und interleave Werte ermittelt?!? Dürfte vermutlich auch für Atari PC2 und PC3 gelten.
Wenn ich diese Werte über die IMG.CFG Datei anpasse, muß ich dann immer wieder neu starten oder werden die beim USB Stick ein stöpseln im laufenden Betrieb aktiv?!?