Ich habe einen Raspberry Pi Zero W1.1 mit Paspberry Pi OS Lite (32 bit) für die Apple2-IO-RPi-Karte aufgesetzt, nach der Anleitung:
- Install Raspberry Pi OS on microSD card using a modern computer
- Use Raspberry Pi Imager
- Select Other => Raspberry Pi OS Lite (32 bit)
- Click on the gear icon in the bottom right
1. Enable ssh
2. Set password
3. Configure wifi
4. Set locale settings - Put microSD card in the RPi
- Install the expansion card into the Apple II
- Power on the Apple II
- Install firmware with utility (can be found on Apple2-IO-RPi.hdv drive image) or use EPROM programmer with AT28C64B.bin
- Use
ssh
to connect to the RPi using the password you configured
Klappt alles bis auf Schritt 9 - der Raspi wird in meinem Netz nicht angezeigt, also weiß ich nicht, wohin (zu welcher IP-Adresse) ich mich verbinden soll per ssh.
Deshalb habe ich Tastatur und Bildschirm angeschlossen und sehe die Bootmeldungen und schließlich ein Login-Prompt. Aber die bekannten Passworte funktionieren nicht.
Ich habe die Kombinationen pi-raspberry, root-blank (Return), root-root und root-toor versucht, immer kommt login incorrect. Was mache ich falsch?