Hallo zusammen,
gestern versuchte ich mein ST412 MFM Laufwerk samt Controller auf meinem 80286iger zum Laufen zu bringen.
Die Festplatte dreht schön hoch, jedoch leuchtet niemals die rote LED auf der Festplatte auf.
Aus dem Internet konnnte ich entnehmen, dass der Controller den IRG 5 verwwendet, dieser leider auch bei einem 286iger für den LPT Port verwendet wird.
The IBM PC and XT BIOSes do not support hard drives and know nothing about them. Support is added via a BIOS extension found on a hard drive controller card. The default settings for XT controller cards are I/O 320, IRQ5 and DMA3. An alternative I/O setting is at 320 and some cards allow the IRQ to be set to 2. The latter is necessary when using an MFM controller in a Tandy 1000, which uses IRQ5 for video (Ghostbusters will not work properly if IRQ5 is disabled for video, as it can be on the SX and TX). The controller's BIOS extension also provides hard drive tables for the types of hard drives it supports.
So nun denke ich, dass ich einen IRQ Konflikt habe.
Was meint ihr oder mache ich was anderen falsch?
Im BIOS sind die FDC für das 1.44er und 5.12er Laufwerk noch aktiv.
Die HDD habe ich auf NONE gesetzt.
Würde der Controller korrekt erkannt werden, so müsste sich ja auch ein BIOS sichtbar machen also ähnlich wie bei der XTIDE Karte oder?
Ich habe mal einpaar Fotos von SYSINFO und CheckIT angehängt
lG
Dieter