Moin,
koennte ich den Upgrade "SMS aufgeloetet" fuer meine 5 schon bestellten Platinen noch nachloesen?
Danke Bernhard
Moin,
koennte ich den Upgrade "SMS aufgeloetet" fuer meine 5 schon bestellten Platinen noch nachloesen?
Danke Bernhard
Moin,
koennte ich den Upgrade "SMS aufgeloetet" fuer meine 5 schon bestellten Platinen noch nachloesen?
Danke Bernhard
Geht...
Danke.
Vielen Dank an Fritzeflink dafür, daß er mich auf die Liste zurück gebracht hat!
Gern würde ich zwei Platinen abnehmen, und gern würde ich das Angebot annehmen,
die Platinen mit aufgelöteten SMD-Bauteilen zu bekommen.
Vielen Dank
Franz
Alles anzeigenVielen Dank an Fritzeflink dafür, daß er mich auf die Liste zurück gebracht hat!
Gern würde ich zwei Platinen abnehmen, und gern würde ich das Angebot annehmen,
die Platinen mit aufgelöteten SMD-Bauteilen zu bekommen.
Vielen Dank
Franz
OK...
Also zur Vorsicht hier nochmal mein Anliegen
min 1. max 2. ja
Danke!
If there still are available i would like to jump in with min 1 max 3 if possible with smd's in place if that would be possible if you are under time pressure just 1 with smd is fine as well, i can try the other 2 if i have an example and a rare case of steady hands and patience
If there still are available i would like to jump in with min 1 max 3 if possible with smd's in place if that would be possible if you are under time pressure just 1 with smd is fine as well, i can try the other 2 if i have an example and a rare case of steady hands and patience
Hi Shifu,
I'm sorry but there are no boards left. Maybe next Time?
If there still are available i would like to jump in with min 1 max 3 if possible with smd's in place if that would be possible if you are under time pressure just 1 with smd is fine as well, i can try the other 2 if i have an example and a rare case of steady hands and patience
Hi Shifu,
I'm sorry but there are no boards left. Maybe next Time?
Next time it is!
I'm sorry but there are no boards left.
Hi Norbert,
ich brauch keine 3 PCBs.
Wie gesagt, min=1, max=3
Das max war fuer den Fall du bekommst nicht alle weg.
Aber du bist der Verteiler (und hast wahrscheinlich schon genug Arbeit damit). Ich misch mich da nicht ein.
Moin zusammen,
ich habe gestern die SMD-Chips bekommen und bin gerade dabei die ICs, wie gewünscht, auf zulöten. Damit werde ich voraussichtlich heute noch fertig.
Wenn ihr mir eure Anschriften zukommen lasst, werde ich zusehen, die Platinen diese Woche noch auf die Reise zu schicken...
funkenzupfer : ich hatte dich wegen "von-bis" schon mit einer Platine berücksichtigt...
Shifu would you like to get one MFM-Emulator?
I've found out I've made a counting/typo error in my LibrOffice Calc-Sheet... so there is one left, if you want...
I'd love to have one if you still got one left!
I'd love to have one if you still got one left!
You'll get them.
Meine Platinen sind angekommen.
Vielen Dank an Norbert!
Jetzt beginnt die Suche nach den passenden Bauteilen.
Von mir auch ein großes DANKESCHÖN!
Von mir auch, dickes fettes Dankeschön.
Ein Board werde ich nur zum lesen von Platten bestücken
Ein weitere schonmal für meine Rainbow.
Was nutzt ihr, BBB oder BBG?
Antikythere und ich haben BBB bei Völkner bestellt.
Bei Reichelt stehen die BBB noch im Online-Katalog als Lieferbar drin, sind sie aber nicht.
Bei meiner Bestellung vom letzten Freitag waren sie im Rückstand, Lieferdatum unbekannt.
Raspberry Pi sind derzeit auch Mangelware.
Würde das passen: scheint recht günstig....
Habe dort schon ein paar bestellt, sehen gut aus soweit, sind BBB und eine MicroSD liegt auch bei.
MfG
Bernhard
Würde das passen: scheint recht günstig....
4 bestellt. Danke für den Tip
Hab ich vielleicht hier im Thread verpasst.
Gibts vielleicht einen Warenkorb für Mouser / Reichelt oder muß man sich das selber zusammenklicken ?
Gibts vielleicht einen Warenkorb für Mouser / Reichelt oder muß man sich das selber zusammenklicken ?
Ja, hier etwa in der Mitte der Seite oder direkt hier bei Mouser...
Is there perhaps a shopping cart for Mouser / Reichelt or do you have to click it together yourself?
Yes, here about in the middle of the page or right here at Mouser ...
Does anyone know of a suitable alternative for the Artesyn LDO03C-005W05-HJ DC/DC converter? They are in backorder at mousers with 38 weeks lead time, and i don't see alot of alternatives that cover the 15w 0.59-5.1v 3A specs
I'm not that good in sourcing alternatives for complex parts like these, since after all they are specced to do a certain job. with Caps you can go a little higher depening on what it does, but for something like this i don't think so...
Does anyone know of a suitable alternative for the Artesyn LDO03C-005W05-HJ DC/DC converter? They are in backorder at mousers with 38 weeks lead time, and i don't see alot of alternatives that cover the 15w 0.59-5.1v 3A specs
Does anyone know of a suitable alternative for the Artesyn LDO03C-005W05-HJ DC/DC converter? They are in backorder at mousers with 38 weeks lead time, and i don't see alot of alternatives that cover the 15w 0.59-5.1v 3A specs
I'm not that good in sourcing alternatives for complex parts like these, since after all they are specced to do a certain job. with Caps you can go a little higher depening on what it does, but for something like this i don't think so...
The 15W DC-DC-Converter from Murata should be also working. It's the succsessor of the alternative Murata DC-DC-Converter form David's BOM.
Shifu : The part is a variable DC/DC converter but is using a fixed resistor to set the output voltage to 5V according to the schematic
https://www.pdp8online.com/mfm…/mfm_reva_pcb/pdf/top.pdf and gets a 12V input.
In principle you can use any DC/DC step down converter of the required power rating of 3A.
For example this should work electrically:
Thanks! i'd rather ask then risk blowing up my first MFM board by using the wrong alternative
Hmm, habe den BBB (und andere Teile) gestern bei Reichelt bestellt und heute die Versandbestätigung bekommen. Offenbar haben die doch noch ein paar auf Lager.
Hmm, habe den BBB (und andere Teile) gestern bei Reichelt bestellt und heute die Versandbestätigung bekommen. Offenbar haben die doch noch ein paar auf Lager.
Sehr seltsam, ich hatte letzten Freitag bestellt und am Montag hiess es "Kein Bestätigter Termin"